Doing Gear The Right Way

Your Ultimate Guide to Cutting Sticks A cutting stick refers to a long rectangular-shaped piece of plastic with different length that is used in guillotine paper cutters for protection of the blade from hitting the metal to increase the lifetime of the blade. Cutting sticks have two types of materials which depend on the cutting frequency, and quality of the guillotine blade. Polyvinyl chloride makes up red cutting sticks which are used with HCHC steel and standard guillotine knives and blades. Another material is polypropylene poly-stone that makes up the grey cutting sticks used with tungsten carbide tipped guillotine and HSS knives and blades. Cutting sticks are made of plastic with a total of four sides and are placed in a groove on the cutter’s bottom, where the stack of the cutting blade rest after the cut is made. Cutting sticks play an important part in any cutting process, assisting in the production of clean cuts. Since the cutting blades rest in the cutting sticks, there is proper cutting to allow the blade to make it through every sheet until he very last bottom sheet. Cutting sticks will not dull the cutter blade and will even help prolong its life. A the cutting stick has a durable design, with plastic taking the force on the impact of the blade while maintaining its structural integrity. If the last one to two sheets are no longer cut all the way through, this is a good sign that your cutting stick is worn out that may need replacement. You need to be aware that each cutting stick can be rotated for eight times before replacing your cutting stick. Each the side of the cutting stick should be used twice because the cutting blade does not rest directly in the center. You can simply flip the cutting stick at 180 degrees to be used on the same side again that can be turned in a total of four times since the cutting stick is square. When all sides are used and worn, they need to be replaced. Cutting sticks are not really expensive, and they are usually sold in bulk quantities. When it comes to proper stack paper operation and maintenance, keep in mind that cutting sticks wear out in time, and failing or damaged cutting sticks can lead to incomplete cuts. It pays off keeping an extra blade on hand in order to prevent downtime while the other blade is getting sharpened. Cutting sticks can help in the cutting process to prevent damage to the cutting blade, and for easy cutting up to the last sheet of paper. Feel free to visit our website or homepage to find out more details about cutting sticks.5 Takeaways That I Learned About Gear

The Beginner’s Guide to Gear